Shandong Plywood hot press machine

Face veneer wire dryer machine

1 Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.

2 Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber

3 Whole casted beam holds the log stongly, and hydraulic driven hooks clamp the log tightly and effectively. Vacuum disc system is used inside the log beam to help holding the big timber in order to avoid logs deforming or dropping down during cutting procedure

4 All switch button are gathered in a cabinet.Single person can operate the machine avoiding the dangerous caused by fault

5 Special designed big size driving gear runs smoothly with a low noie when it runs in a high speed

1. High performance CNC system control feeding. The board is smooth, with high productivity.

2. The feeding system adopts the screw and screw nuts. The screw nuts adopt the magnesium aluminum alloy, copper and other materials. So it is with long service life.

3. Automatic adjustment of cutting system, skin is much more uniform and smooth. Apply to woods with different diameters.

4. During the rotary cutting production, the machine can adjust the thickness of two kinds of veneer constantly and won't cause the crack of the veneers.

5. Block type screw and slider, high-precision and energy-saving.

6. The NC rotary and leather cutting are in one, so the machine is with high productivity and labor-saving.

1 Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.

2 Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber

3 Whole casted beam holds the log stongly, and hydraulic driven hooks clamp the log tightly and effectively. Vacuum disc system is used inside the log beam to help holding the big timber in order to avoid logs deforming or dropping down during cutting procedure

4 All switch button are gathered in a cabinet.Single person can operate the machine avoiding the dangerous caused by fault

5 Special designed big size driving gear runs smoothly with a low noie when it runs in a high speed

Core veneer machine is suitable for core joining together in plywood production line. It can work different length sizes of core veneer with high strength thread and hot melt adhesive connection as one whole body Then facilitate the subsequent stages of production of plywood line. The whole process can be operated by one worker, it is time-saving and efficient.