Taiwan core veneer composer mainly used in horizontal splicing 2 or more pcs venner with same thickness
to one sheet.This machine can automatic stacking. It won’t stuck and overlap the veneers while
working, and the rubber thread can stick tightly. This machine is easy to operate, and maintain.
It’s the best choice for the plywood producing factory.
Automatic Taiwan Core Veneer Composer machine
One operator required, no overlap or open joint, no break
Save 70% core finishing
Save 80% assembling work
Save 50% puttying work
1.The fourth generation, PLC control,Stable operation, Repair simple, Low power cost.
2. Synchronous Servo motor controlled, effective overlap and joint control
3. Precise thickness checking, even thickness, minimum polishing
4.Supported by Japan SMC, FESTO,Taiwan Taida, German Schneider and other international top level brands
The Core Veneer composer mainly used in horizontal splicing 2 or more sheets of veneer with same thickness( 1.0mm-4.0mm) to one sheet. This machine can automatic stacking.
Machine bed/machine frame
Iron casting and fine finishing
Process with Taiwan standard
PLC computer control
Low voltage circuit breaker
6-7 sheet per minute
Value ratio in 3 years
Free deformation for 50 years, in maturity period, with best property in absorbing energy, reducing vibration and stability