 |
| Quantity: | |
|---|---|
CXCT-4C1
changxing
One operator required, no overlap or open joint, no break
Save 70% core finishing
Save 80% assembling work
Save 50% puttying work
1.The fourth generation, PLC control,Stable operation, Repair simple, Low power cost.
2. Synchronous Servo motor controlled, effective overlap and joint control
3. Precise thickness checking, even thickness, minimum polishing
4.Supported by Japan SMC, FESTO,Taiwan Taida, German Schneider and other international top level brands
The Core Veneer composer mainly used in horizontal splicing 2 or more sheets of veneer with same thickness( 1.0mm-4.0mm) to one sheet. This machine can automatic stacking.
( standard size like 4*8ft, 8*4ft,8*8ft or customized )
No. | Item | Parts | CXCT-4C1 |
1 | Machine bed/machine frame | Machine support | Iron casting and fine finishing |
2 | Technology process | Overall unit | Process with Taiwan standard |
Weight | Overall unit | 7T | |
3 | Unit configuration | Brake combiner | LSA |
4 | Reduction box | Dongfang | |
Service motor | Taida | ||
5 | Gear reducer | Jinding | |
6 | Elec. Controlsys | PLC computer control | Taida |
7 | Monitor (display) | Taida | |
8 | Low voltage circuit breaker | Schneider | |
9 | A.C. contactor | Schneider | |
10 | Intermediate relay | Schneider | |
Output | 6-7 sheet per minute | ||
Market holding | 70% | ||
Value ratio in 3 years | 70% | ||
Quality warranty | 2 years | ||
Service life | 20 years | ||
11 | Comprehensive assessment | Overall unit | Free deformation for 50 years, in maturity period, with best property in absorbing energy, reducing vibration and stability |
Cell/Whatsapp:+86 13695390052
Richardzhang@chinachangxing.com
One operator required, no overlap or open joint, no break
Save 70% core finishing
Save 80% assembling work
Save 50% puttying work
1.The fourth generation, PLC control,Stable operation, Repair simple, Low power cost.
2. Synchronous Servo motor controlled, effective overlap and joint control
3. Precise thickness checking, even thickness, minimum polishing
4.Supported by Japan SMC, FESTO,Taiwan Taida, German Schneider and other international top level brands
The Core Veneer composer mainly used in horizontal splicing 2 or more sheets of veneer with same thickness( 1.0mm-4.0mm) to one sheet. This machine can automatic stacking.
( standard size like 4*8ft, 8*4ft,8*8ft or customized )
No. | Item | Parts | CXCT-4C1 |
1 | Machine bed/machine frame | Machine support | Iron casting and fine finishing |
2 | Technology process | Overall unit | Process with Taiwan standard |
Weight | Overall unit | 7T | |
3 | Unit configuration | Brake combiner | LSA |
4 | Reduction box | Dongfang | |
Service motor | Taida | ||
5 | Gear reducer | Jinding | |
6 | Elec. Controlsys | PLC computer control | Taida |
7 | Monitor (display) | Taida | |
8 | Low voltage circuit breaker | Schneider | |
9 | A.C. contactor | Schneider | |
10 | Intermediate relay | Schneider | |
Output | 6-7 sheet per minute | ||
Market holding | 70% | ||
Value ratio in 3 years | 70% | ||
Quality warranty | 2 years | ||
Service life | 20 years | ||
11 | Comprehensive assessment | Overall unit | Free deformation for 50 years, in maturity period, with best property in absorbing energy, reducing vibration and stability |
Cell/Whatsapp:+86 13695390052
Richardzhang@chinachangxing.com
