 |
| Quantity: | |
|---|---|
Model A-breathy type veneer dryer machine:
all the hot platen close at the same time.that means all the veneer can be dried at the same time. that will avoid the top veneer dry too less and the download veneer dry too much. and at the same time, the veneer can be flat.so the plywood quality will be very good produced by this kind of veneer.
1,the hot platen is solid plate
2,using factory waste heating fully(if the boiler is already installed in the factory)
3,making the veneer flatness
4,machine installation area is small.
5,heating medium is steam or hot oil.
Specifciation of models A breath type veneer dryer machine:
(this specifications belong to existing model, we are improving our machine all the time)
Pressure: 800KN
Board inlet direction: transverse and longitudinal model.
Hot plate size: 1370x2700x42mm
Layers: 15
Main cylinders: Dia.100mm x 4pcs
Main cylinders body: solid
Cylinders made in wuxi city-best quality in China.
Motor power: 15kw x 1pcs
Motor brand: SHANDONG HUALI, FAMOUS BRAND IN CHINA.
WITH SAME TIME CLOSING DEVICE
VENEER THICKNESS APPLICABLE:1-10MM
Model B-Square tube type veneer dryer machine
This model veneer dryer machine uses the Thermal oil and steam as Heating medium.It can dry at least 1-3 cbm veneer per hour. The capacity is decided by the veneer thickness and moisture.The machine layer quantity can be designed according to client's requirement. It usually has 12-18layers.
1,machine installation area is small.
2,Using factory waste heating fully.
3,saving the Energy consumption.
4,higher drying capacity.
5,making the veneer flatness
6,less investment.
7,low Maintenance cost.
Specification of Model B square tube veneer dryer machine:
(this specifications belong to existing model, we are improving our machine all the time)
Pressure: 60T
heating tube: seamless square tube
Combined heating tubes: 1370x2700x42mm
Layers: 18
Cylinders: Dia.120mmx2sets
Cylinders' original: linyi city or wuxi city
Motor power: 7.5kw
Veneer thickness range: 1-6mm
Cell/Whatsapp:+86 13695390052
Richardzhang@chinachangxing.com
Model A-breathy type veneer dryer machine:
all the hot platen close at the same time.that means all the veneer can be dried at the same time. that will avoid the top veneer dry too less and the download veneer dry too much. and at the same time, the veneer can be flat.so the plywood quality will be very good produced by this kind of veneer.
1,the hot platen is solid plate
2,using factory waste heating fully(if the boiler is already installed in the factory)
3,making the veneer flatness
4,machine installation area is small.
5,heating medium is steam or hot oil.
Specifciation of models A breath type veneer dryer machine:
(this specifications belong to existing model, we are improving our machine all the time)
Pressure: 800KN
Board inlet direction: transverse and longitudinal model.
Hot plate size: 1370x2700x42mm
Layers: 15
Main cylinders: Dia.100mm x 4pcs
Main cylinders body: solid
Cylinders made in wuxi city-best quality in China.
Motor power: 15kw x 1pcs
Motor brand: SHANDONG HUALI, FAMOUS BRAND IN CHINA.
WITH SAME TIME CLOSING DEVICE
VENEER THICKNESS APPLICABLE:1-10MM
Model B-Square tube type veneer dryer machine
This model veneer dryer machine uses the Thermal oil and steam as Heating medium.It can dry at least 1-3 cbm veneer per hour. The capacity is decided by the veneer thickness and moisture.The machine layer quantity can be designed according to client's requirement. It usually has 12-18layers.
1,machine installation area is small.
2,Using factory waste heating fully.
3,saving the Energy consumption.
4,higher drying capacity.
5,making the veneer flatness
6,less investment.
7,low Maintenance cost.
Specification of Model B square tube veneer dryer machine:
(this specifications belong to existing model, we are improving our machine all the time)
Pressure: 60T
heating tube: seamless square tube
Combined heating tubes: 1370x2700x42mm
Layers: 18
Cylinders: Dia.120mmx2sets
Cylinders' original: linyi city or wuxi city
Motor power: 7.5kw
Veneer thickness range: 1-6mm
Cell/Whatsapp:+86 13695390052
Richardzhang@chinachangxing.com
